Windows Vista/7 Repair Disc

Source by Rich

• How to make a Windows 7 repair disc yourself
• How to make a Windows 7 repair USB drive
• How to boot from a disc/USB drive and use it to repair your PC

Note: A repair disc cannot be used to install Windows and provides no functionality beyond that of a Windows installation disc. If you already have an installation disc, you can use that for system recovery.

Burn a Windows Vista/7 Repair Disc
To burn your own Windows repair disc you’ll need to be using Windows 7 or Windows Vista SP1 or later release:
1. Click Start, type create and click Create a System Repair Disc (Windows 7) or Create a Recovery Disc (Windows Vista)

2. Insert a CD/DVD, choose the DVD drive in which the disc resides and click Create Disc

Once the disc is finished, I recommend booting from the disc to test it—before you really need it.
Make a Windows Vista/7 Repair USB drive
If you own a netbook, don’t have an optical (CD/DVD/Bluray) drive etc., you should create a bootable USB repair drive.
To make a bootable Windows repair USB drive you’ll need to:

1. Download the Windows recovery disc
2. Make your thumb drive bootable
3. Copy the recovery files to your thumb drive

1. Download the Windows Recovery Disc

Do a web search for and download one of the following recovery discs

• Windows 7 32-bit Recovery Disc torrent
  
• Windows 7 64-bit Recovery Disc torrent
  
• Windows Vista 32-bit Recovery Disc  torrent
• Windows Vista 64-bit Recovery Disc  torrent

How to use torrents.

2. Make your Thumb Drive Bootable

To prepare your USB thumb drive, you will need to delete all the drive’s files, create a FAT32 active partition, and copy over the Windows recovery files. To do this:
2.1. Press Windows Key+R to open the Run dialog
2.2. Type diskpart and press Enter (If you don’t have diskpart, get it here)
2.3. Type list disk and press Enter
2.4.  Type select disk 3 where the “3″ is the corresponding number of your USB drive
2.5. Type clean and press Enter
2.6. Type create partition primary  and press Enter
2.7. Type active  and press Enter
2.8. Type format fs=fat32 quick  and press Enter
2.9. Type assign and press Enter to assign the USB drive a letter in Computer

3. Copy the Recovery Files to Your Thumb Drive.

To copy the files to your thumb drive:
3.1. Open the file you downloaded in step 1 with a utility capable of browsing ISO images (7 zip works well)

1. Download 7zip and install it
2. Right click the ISO file and select 7-Zip > Open Archive

3.2. Extract the contents of the ISO to the USB drive you formatted in step 2
Boot from a Disc/USB Drive and Use it to Repair Your PC
So now you’ve either downloaded a burned the Windows Vista/7 recovery disc, created your own Windows 7 recovery disc, or made a bootable Windows Vista/7 recovery thumb drive.
To boot from your disc/USB:
1. Insert your bootable repair disc/USB drive
2. Reboot your PC
3. When your BIOS is loading (if you have a brand-name PC, this is usually when you can see the brand’s logo), press the key that loads the boot options menu (this is usually displayed as an option on the screen and is typically the ESC/F8 key)
4. Arrow down to “CD-ROM Drive” / “DVD-ROM Drive” / “Removable Media” / “USB Media” and press Enter

The recovery software will take some time to load:

5. Now select your default keyboard layout:

6. After the software detects your installation of Windows, click Next:

What Can You Do with a Repair Disc?
A repair disc cannot be used to reinstall Windows but can perform many repair tasks. Here is just a small list of what you can do with a repair disc:

1. Startup Repair
2. System Restore
3. System Image Recovery
4. Windows Memory Diagnostic
5. Command Prompt

If you cannot boot into Windows because of corrupted settings, a virus etc, then you may find using a previously-created System Restore point will help you get back to Windows.
If you created a system image using Backup and Restore, you can use it to completely restore your computer to a previous state.
The memory diagnostic is used to check for bad memory sectors (more about the memory diagnostic tool.)
Finally, the command prompt can do (almost) anything the full command prompt can do while using Windows. This can be very useful to run tools like chkdsk to find out why your hard drive is suddenly not working.

Running the startup repair tool

Run the Startup Repair tool by using the Windows Vista or Windows 7 installation disc or by using the computer's preinstalled recovery options.

To run the Startup Repair tool by using the Windows Vista or Windows 7 installation disc

If you have the Windows Vista or Windows 7 installation disc, follow these steps to use the Startup Repair tool:

1.	Insert the Windows Vista installation disc. Note The computer must be configured to start from a CD or from a DVD. For information about how to configure the computer to start from a CD or from a DVD, see the information that came with the computer.

2.	Restart the computer. To do this, click Start, click the arrow next to the Lock button, and then click Restart Note If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.
3.	Set your language preference, and then click Next Note In most cases, the startup repair process starts automatically, and you do not have the option to select it in the System Recovery Options menu.
4.	Click Repair your computer.
5.	In the System Recovery Options dialog box, click the operating system that you want to repair, and then click Next
6.	In the System Recovery Options menu, click Startup Repair to start the repair process.
7.	When the repair process is complete, click Finish

If the above step does not fix the issue would suggest that you perform a System Restore on the computer to restore back the previous settings when it was working fine.

To use the Windows Recovery Environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows Recovery Environment, follow these steps:

1.	Put the installation disc in the disc drive, and then start the computer.
2.	Press a key when you are prompted.
3.	Select a language, a time and currency, and a keyboard or input method, and then click Next.
4.	Click Repair your computer
5.	In the System Recovery Options dialog box, click the operating system that you want to repair, and then click Next

In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point that was created when the program or the driver was installed.

Refer the below link for more information.

http://windows.microsoft.com/en-US/windows7/Restore-your-computer-from-a-system-image-backup