Online Armor on Win 2003 (oadriver.sys and rdbss.sys)

 http://www.bleepingcomputer.com/forums/t/444263/what-is-ojlistexe-by-laurent/
Download Security Check from HERE, and save it to your Desktop.
* Double-click SecurityCheck.exe
* Follow the onscreen instructions inside of the black box.
* A Notepad document should open automatically called checkup.txt
=================
Ok, lets run a malwarescan amd after that we need to update some things.

Please download MiniToolBox, save it to your desktop and run it.

Checkmark the following checkboxes:

• Flush DNS
• Report IE Proxy Settings
• Reset IE Proxy Settings
• Report FF Proxy Settings
• Reset FF Proxy Settings
• List content of Hosts
• List IP configuration
• List Winsock Entries
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files

Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.

Note: When using "Reset FF Proxy Settings" option Firefox should be closed.


Next run MBAM (MalwareBytes):

Please download Malwarebytes Anti-Malware and save it to your desktop.
Download Link 1 <<<== Use this one first.

Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.

• Make sure you are connected to the Internet.
• Double-click on mbam-setup.exe to install the application.
  For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.
• When the installation begins, follow the prompts and do not make any changes to default settings.
• When installation has finished, make sure you leave both of these checked:
  • Update Malwarebytes' Anti-Malware
  • Launch Malwarebytes' Anti-Malware
• Then click Finish.

MBAM will automatically start and you will be asked to update the program before performing a scan.

• If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
• If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.

On the Scanner tab:

• Make sure the "Perform Quick Scan" option is selected.
• Then click on the Scan button.
• If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
• The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
• When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
• Click OK to close the message box and continue with the removal process.

Back at the main Scanner screen:

• Click on the Show Results button to see a list of any malware that was found.
• Make sure that everything is checked, and click Remove Selected.
• When removal is completed, a log report will open in Notepad.
• The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
• Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.
• Exit MBAM when done.

Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.

Troubleshoot Malwarebytes' Anti-Malware
==========================
 http://www.bleepingcomputer.com/forums/t/279327/infected-with-virus-or-trojan-laptop-computer/

• Please set your system to show all files.
  Click Start, open My Computer, select the Tools menu and click Folder Options.
  Select the View Tab. Under the Hidden files and folders heading, select Show hidden files and folders.
  Uncheck: Hide file extensions for known file types
  Uncheck the Hide protected operating system files (recommended) option.
  Click Yes to confirm.

Please download GMER from one of the following locations and save it to your desktop:

• Main Mirror
  This version will download a randomly named file (Recommended)
• Zipped Mirror
  This version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.

• Disconnect from the Internet and close all running programs.
• Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.
• Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.
• Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.
  
  
  
• GMER will open to the Rootkit/Malware tab and perform an automatic quick scan when first run. (do not use the computer while the scan is in progress)
• If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.
• Now click the Scan button. If you see a rootkit warning window, click OK.
• When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.
• Click the Copy button and paste the results into your next reply.
• Exit GMER and re-enable all active protection when done.

-- If you encounter any problems, try running GMER in Safe Mode. ===============
http://www.geekstogo.com/forum/topic/296796-my-computer-keeps-crashing-when-i-install-anti-virus-software/page__st__15
Malwarebytes' Anti-Malware
Please download Malwarebytes' Anti-Malware from Here or Here

Double Click mbam-setup.exe to install the application.

• Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
• If an update is found, it will download and install the latest version.
• Once the program has loaded, select "Perform Quick Scan", then click Scan.
• The scan may take some time to finish,so please be patient.
• When the scan is complete, click OK, then Show Results to view the results.
• Make sure that everything is checked, and click Remove Selected.
• When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
• The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
• Copy&Paste the entire report in your next reply.

If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed with the disinfection process,if asked to restart the computer,please do so immediatly.

next

Please do a scan with ESET OnlineScan

Note: If you run this in a browser other than IE you will be asked to download and install esetsmartinstaller_enu.exe

• Click the button.
• Check
• Click the button.
• Accept any security warnings from your browser and allow it to install the ActiveX control.
• Check
• Push the Start button.
• ESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.
• When the scan completes, push
• Push , and save the file to your desktop using a unique name, such as ESETScan. Include the contents of this report in your next reply.
• Push the button.
• Push

 ===================
Rdbss.sys is Redirected Drive Buffering SubSystem Driver.
rdbss.sys is located in the folder C:\Windows\System32\drivers.You may
extract a fresh file from XP CD.
Or Run this command:
sfc /scannow
Reboot your machine and see if the issue will re4solve.
Did you checked the Event Viewer for error messages?
Update the Modem/Router Firmware from the manufacturer website.
Hotfix Download Available
http://support.microsoft.com/kb/944505/en-us
Programs take longer than expected to start in Windows XP
http://support.microsoft.com/kb/834937/en-us
========================
http://forums.majorgeeks.com/showthread.php?t=211713
Quickly just try this and not in safe mode but normal mode, open Internet Explorers No-Addons mode (found in Start > All Programs > Accessories > System Tools (file name is Internet Explorer (No Add-ons))....... if this works then the issue is likely one of the add-ons you have installed, it is most likely not a version of the add-on thats compatible with IE8, while it may have been with the older IE6/7 that you where using.
So to trace the culprit you can troubleshoot the culprit and use this info HERE to help disable all non Microsoft add-ons and then restart IE and enable one at a time and restart IE after each one until you find the culprit.
Main causes can be toolbars like Yahoo, Google etc or add-ons from your Antivirus software, so make sure thats fully upto date with latest version, also what new software did you install IF ANY before this started to happen as IE has been ok for you up until now?
Do you use Skype by any chance?