Bootloaders in multiboot OS

Source by talsemgeest
How to restore the Ubuntu/XP/Vista/7 bootloader (Updated for Ubuntu 11.10)
This How-to is for windows dual booters who reinstall an operating system only to find that it has taken away access to their other operating system.

Whether you want to restore the XP, Vista, 7 or Ubuntu (Grub) bootloader, this guide will walk you through it.
All three parts of this tutorial require that you boot from a cd. If you don't know how to do this, check here.
If you have made a mistake and want to revert the changes, simply follow the instructions for reinstalling the previous bootloader. For example, if you have installed vista over ubuntu, try to get the ubuntu bootloader back, but want to get the vista bootloader back, simply follow my instructions for installing the vista bootloader.
How to restore the Ubuntu grub bootloader (9.10 and beyond)
First you need to find out what your drives are called. You can do this by going to a terminal and typing:

Code:

sudo fdisk -l

From that you need to find the device name of your Ubuntu drive, something like “/dev/sda5″.
So, still in the terminal, type:

Code:

sudo mkdir /media/sda5
sudo mount /dev/sda5 /media/sda5

And then, to reinstall the grub:

Code:

sudo grub-install --root-directory=/media/sda5 /dev/sda

Push enter and you’re done! Of course you need to replace “/dev/sda5″ and “/dev/sda” with what you found in the fdisk output.
How to restore the Ubuntu grub bootloader (9.04 and older)
First of all, all credit for this part of the tutorial goes to catlet. I am simply rewriting his tutorial to have all three bootloaders in this tutorial.
So, lets begin. To restore the grub, you must boot off the ubuntu live cd. Any ubuntu live cd will do.
Once there, open a terminal (Applications>Accessories>Terminal) and type this:

Code:

sudo grub

Next, you need to find which hard drive ubuntu and the grub is installed to. You do this by running this command:

Code:

find /boot/grub/stage1

Take note of what it returns (something like (hd0,1).)
Now you need to tell Grub where it is installed. Using the output of the last command, change this one and run it:

Code:

root (hd,)

Replacing and with what you got back before. For example, if "find /boot/grub/stage1" gave me "(hd0,1)", you would run "root (hd0,1)"
Ok, so thats the configuration over and done with. Now we just need to run one command to install the Grub to your hard drive:

Code:

setup (hd0)

Now to quit and check if it has worked:

Code:

quit

Code:

sudo reboot

Make sure you have taken the live cd out of your disc tray. All going well, you should start back up and see the grub once again.
How to restore the Windows XP bootloader
For this you will need your Windows XP installation CD. Boot into it now.
You will get to a part where it asks if you want to repair or recover. To do so, press "r".
If prompted, enter your Windows XP administrator password. This will leave you at at a command line, so type in the following two commands:

Code:

fixboot

Code:

fixmbr

Then type

Code:

exit

then remove your XP cd. If everything has gone well, you should come to your XP bootloader.
How to restore the Windows Vista or 7 bootloader
To restore the Windows Vista/7 bootloader, you must first boot off your Windows Vista/7 installation DVD.
If you have one of the many OEM computers that didnt come with a Vista/7 installation disk, you can get the same effect with a Vista recovery disk, which you can download for Vista or Win 7.
When you get to the Regional settings, select your Location/Keyboard setting then click next. On the next page you must click on "Repair your computer."
On the next page, if it finds your Windows Vista/7 installation, make sure it is UNSELECTED before clicking next.
Then click on "Command prompt". From there, type in the folowing:

Code:

bootrec.exe /fixboot

Code:

bootrec.exe /fixmbr

Now close the two windows and click "Restart."
Take out your Vista/7 DVD and hopefully, you will be left with your Windows Vista/7 Bootloader.

===========   ===========

Reinstalling GRUB 2 from LiveCD
(with my additions and corrections --cebaehren)
If you cannot boot from GRUB 2 and need to reinstall it, here is the simple method. For more details or for advanced options, refer to the Ubuntu community documentation here:
Grub2 – Reinstalling GRUB 2:

• Boot the 9.10 Karmic LiveCD to the Desktop.
• Open a terminal – Applications, Accessories, Terminal.
  If you have an fakeraid try first
  sudo modprobe -q dm-mod
  sudo modprobe -q dm-mirror
  sudo /sbin/dmraid -ay
  Note that in an diskmapperRAID (not multiplediskRAID!) the RAID device (two or more hard disks in array) is found as a nvidia device with long stupid name (nvidia_edabbdgc, with first partition as nvidia_edabbdgc1 and counting
  Use /dev/dm-0 for the array of disks and dm-1 for the first partition and so counting for the following parttitions
  that is fdisk /dev/dm-0 or /dev/dm-
• Determine your normal system partition – `sudo fdisk -l` (That is a lowercase L)
• If you aren’t sure, run `df -Th`. Look for the correct disk size and ext3 or ext4 format.
• Mount your normal system partition:
  Code:

  sudo mount /dev/sdXY /mnt

  • Example: sudo mount /dev/sda1 /mnt
  • Note: The partition to mount is normally the partition on which Ubuntu was installed: sda1, sdb5, etc.
    If you have a separate /boot partition, use the device on which the /boot partition is located. Grub 2 works best when installed in the MBR of the drive to which BIOS boots. Also remember that you mount the partition (including the number) in this step, but you do not include the partition number when you run the “sudo grub-install” command later.
  • cebaehren note: the kernel or Linux command consider the X as a letter of alphabet for the (considered as) scsi device (sda, sdb, sdc). The partitions starting with 1 (sda1, ... sdb3, sde5, etc)
  • Note: GRUB 2 counts the first drive (not this case in X) as “0″, but the first partition (Y) as “1″
• Only if you have a separate boot partition:
  • Code:

    sudo mount /dev/sdXY /mnt/boot

    with sdXY being your /boot partition designation.
• Reinstall GRUB 2:
  Code:

  sudo grub-install --root-directory=/mnt /dev/sdX

• • Example: sudo grub-install –root-directory=/mnt /dev/sda
  • Note: Substitute the device on which Ubuntu was installed – sda, sdb, etc. Do not specify a partition number.
• Unmount the partition:
  Code:

  sudo umount /mnt

• Reboot.

Restore the Windows Vista or 7 bootloader

Source
To restore the Windows Vista/7 bootloader, you must first boot off your Windows Vista/7 installation DVD.
If you have one of the many OEM computers that didnt come with a Vista/7 installation disk, you can get the same effect with a Vista recovery disk, which you can download for Vista or Win 7.
When you get to the Regional settings, select your Location/Keyboard setting then click next. On the next page you must click on "Repair your computer."
On the next page, if it finds your Windows Vista/7 installation, make sure it is UNSELECTED before clicking next.
Then click on "Command prompt". From there, type in the folowing:

Code:

bootrec.exe /fixboot

Code:

bootrec.exe /fixmbr

Now close the two windows and click "Restart."
Take out your Vista/7 DVD and hopefully, you will be left with your Windows Vista/7 Bootloader.

Das u-boot-v2

The Barebox Bootloader

Barebox (formerly known as u-boot-v2) is a bootloader that inherits the best of U-Boot and the Linux kernel: The size and look-and-feel of u-boot, with driver model and lots of design concepts from the kernel.

You can find the latest of our timed releases in the download section. Check the repository for the most recent developments. Feel free to subscribe to the mailing list. Note also the slides from the ELCE09 talk by Sascha Hauer, creator of barebox.

If you search for a kernel hacker friendly bootloader, read on! 

======================

denx.de/wiki/U-Boot/

U-Boot Home  Documentation 

Source Code The Custodians

netboot.me

netboot.me is a service that allows you to boot nearly any operating system or utility on any computer with a wired internet connection - without having to know ahead of time what you'll want to boot. Once you can netboot.me, you never need to update your boot disk again!

netboot.me works through the magic of netbooting. There are a number of ways to boot a computer with netboot.me. The simplest is to download a bootable image and burn it to a CD, USB memory stick, or floppy disk. Boot off it on any networked computer, and it will automatically fetch the latest boot options from netboot.me and let you choose from dozens of installation, recovery, testing, portable desktop and other tools. You can also start netboot.me from any computer running gPXE, or from any netbootable computer with some simple tweaks to your DHCP server.

Reparation des Vista-bootloaders

Source
Zwei Möglichkeiten:

1. Von der Vista-DVD booten, die ersten Dateien laden lassen und dann die Reparatur-Option aufrufen (anstatt Vista neu zu installieren).
2. Mit dem Tool EasyBCD kann man den Vista Bootloader auch aus Windows XP heraus wiederherstellen (.NET Framework muss zusätzlich installiert sein).
Ohne vollwertige VISTA DVD eins von vielen Bootloader Tools downloaden:
EasyBCD KLICK oder
VistaBootPRO KLICK