Bienvenido! - Willkommen! - Welcome!

Bitácora Técnica de Tux&Cía., Santa Cruz de la Sierra, BO
Bitácora Central: Tux&Cía.
Bitácora de Información Avanzada: Tux&Cía.-Información
May the source be with you!
Showing posts with label power down. Show all posts
Showing posts with label power down. Show all posts

Tuesday, October 5, 2010

Windows 7 will not enter sleep mode automatically

Source

Please first uninstall all unnecessary devices and see if the issue can be resolved. Also, test inClean Boot as Solution_Provider mentioned. If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
 Besides, please use Powercfg command to check this issue. To do that, refer to the steps below:
1. Click the Start Button, type "cmd" (without quotation marks), right click on the "Cmd.exe" in the search result list and select "Run as administrator".
2. Type "powercfg -devicequery wake_armed" (without quotation marks) in the open window and press Enter Key.
3. A list of the configured devices to wake the computer will be received, then please type the following command to disable them one by one and see if the culprit can be found. (We may test the result after disabling each device.)
Powercfg -devicedisablewake "devicename"
Note: "devicename" is a device name listed as a result of running the first command.
For example, if the network card "Broadcom NetXtreme Gigabit Ethernet" is listed, we can type the following command to disable it and press Enter.
Powercfg -devicedisablewake "Broadcom NetXtreme Gigabit Ethernet"
4. Please repeat the steps for other devices in the list.
5. Reboot the computer and check this issue again.
What's the result now?
For more information, please refer to Powercfg Command-Line Options.
If the issue persists, please refer to the following articles for more troubleshooting suggestions:

Wednesday, June 17, 2009

PC schaltet beim Herunterfahren nicht ab

Source
Achtung: dieser Tipp funktioniert nicht beim W2K-Server!
Eigentlich sollte der PC unter Windows 2000/XP beim Herunterfahren abschalten, sofern es
sich um ein ATX-Modell handelt. Dies ist aber dann z.B. nicht der Fall, wenn man W2K / XP
absichtlich ohne ACPI installiert. Um das Abschalten dennoch zu erreichen, muss man in
der Systemsteuerung unter "Energieoptionen" auf der Registerkarte "APM" die
"Unterstützung für das Advanced Power Management" aktivieren.
Wenn diese Registerkarte fehlt, muss man im Gerätemanager unter Ansicht / Ausgeblendete Geräte anzeigen aktivieren.
Dann wird in der Geräteliste auch der "Herkömmliche NT-APM Schnittstellenknoten" angezeigt und ist vermutlich deaktiviert.
Also aktivieren, danach wird in den "Energieoptionen" auch die Registerkarte "APM" angezeigt.
---------------------------------
Mehrere Möglichkeiten kommen hier in Betracht:
1. Der PC besitzt kein ATX Netzteil.
2. Der PC wurde ohne ACPI installiert. Hier muss APM (Unterstützung für Advanced Power Management) eingeschaltet werden.
Zu finden unter: Systemsteuerung / Energieoptionen
Dort APM einschalten. Jetzt sollte W2K den Rechner automatisch ausschalten können.
3. Schlüssel: HKEY_LOCAL_MACHINE / Software / Microsoft / WindowsNT / CurrentVersion / Winlogon
Wert: PowerdownAfterShutdown [REG_SZ] auf "1" stellen.
4. Im BIOS-Setup unter Powermanagement die Option soft-off by pwr-bttn (beim AWARD-BIOS) auf Instant-Off stellen.