The connection to the server was reset while the page was loading
Source
in address bar type:
about:config
and search for network.dns
network.dns.ipv4OnlyDomains
and it was set to .doubleclick.net!
I double-clicked the entry and deleted the string value so it was nothing, now everything is working fine. Give that a try!
SOLUCIÓN?
in address bar type:
about:config
and search for
network.dns
network.dns.disableIPv6 false
must be toggle to true [IPv6 disabled]
Try this, too:
Control Panel -- All Control Panel Items -- Troubleshooting -- Search Results
TCP/IP stack Winsock settings in Windows Vista may get corrupted, causing errors and problems with Internet connectivity.Most of the Internet connectivity problems in Windows Vista arise out of corrupt Winsock settings.
Repair And Reset Windows Vista TCP/IP Winsock Catalog Corruption
Corrupt Winsock or Windows sockets configuration can be due to a lot of reasons such as installation of a networking software, or due to virus, trojan or malware infection, or sometime even due to disinfection of spyware by security software.
The Layered Service Provider (LSP) / Windows Sockets (Winsock) portion of the network stack is a key component in all network traffic, LAN and WAN. When it stops working, we say that it’s “corrupted”.
The symptoms of corruption are given below:
The symptoms of corruption are given below:
- Connectivity through some services, but not all.
- Low level services like ping may work, but email won’t work.
- Email might work, but not the browser.
- If you have multiple browsers, maybe Firefox will work but Internet Explorer won’t.
- Connectivity to local addresses, but nothing on the Internet.
- Connectivity to some computers on the LAN, but not others.
- Slow connectivity all around.
- Strange diagnoses / messages, mentioning mysterious objects like handles, semaphores, or sockets.
- Strange name / address resolution results (garbled names)
When Winsock corrupts, the networking errors that you may face include unable to surf the Internet with “Page cannot be displayed” error message in Internet Explorer or Firefox even though the DSL/ADSL/cable Internet connection is connected. Sometimes, Windows Firewall/Internet Connection Sharing (ICS) Service is terminated as well.
To Repair and Reset the TCP/IP Winsock in Windows Vista
- Click on the Windows Vista Start button.
- Type Cmd in the Start Search text box.
- Press Ctrl-Shift-Enter keyboard shortcut to run Command Prompt as Administrator. Allow elevation request.
- Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.
- Restart the computer.
The netsh winsock reset command resets the Winsock catalog to the default configuration. This can be useful if a malformed LSP is installed that results in loss of network connectivity. While use of this command can restore network connectivity, it should be used with care because any previously-installed LSPs will need to be re-installed.This command does not affect Winsock Name Space Provider entries.
Note: To check which LSPs installed on your Vista system, use
netsh winsock show catalog
Note that resetting the Winsock using netsh winsock reset command in SP2 removes all the third-party LSPs and restores Winsock to factory default setting. Existing programs that uses their own LSPs, need to be reinstalled again. Example for such programs is Google Desktop Search.
========================Repair and Reset Windows Vista TCP/IP Winsock Catalog Corruption
When Winsock corrupts, the networking errors that you may face include unable to surf the Internet with “Page cannot be displayed” error message in Internet Explorer or AOL even though the DSL/ADSL/cable Internet connection is connected. Sometimes, Windows Firewall/Internet Connection Sharing (ICS) service is terminated as well.
To repair and reset the Windows Vista
- Click on Start button.
- Type Cmd in the Start Search text box.
- Press Ctrl-Shift-Enter keyboard shortcut to run Command Prompt as Administrator. Allow elevation request.
- Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.
- Restart the computer.
What netsh winsock reset command does are it resets Winsock Catalog to a clean state or default configuration. It removes all Winsock LSP (Layered Service Providers) previously installed, including the potential malfunctioned LSP that causes loss of network packets transmission failure. So all previously-installed LSPs must be reinstalled. This command does not affect Winsock Name Space Provider entries.
Note: To check which LSPs installed on your Vista system, use netsh winsock show catalog command.
It’s also possible to reset TCP/IP Internet Protocol stack.
=======================
Fix Winsock Manually on Windows 7
1. Open up the command line utility and enter:
netsh winsock reset catalog (resets winsock entries)
netsh int ip reset reset.log hit (resets TCP/IP stack)
netsh int ip reset reset.log hit (resets TCP/IP stack)
2. Reboot your PC
Fix Winsock via Batch
I wrote a little batch that will run the commands for you. This could come in handy if you forget the commands and you can no longer go online to look them up.
Download that file and to run it right-click on winsockfix.bat and click on “Run as administrator”.
======================
You should try to repair/reset Winsock in Windows 7 if you are having problems with your network controller. I’m having some major problems with my internet connection at the momemt. Sometimes, I can’t seem to enable/disable the local area connection adapter.
If you also regularly have connectivity issues and your network connections is acting crazy, you might want to do some troubleshooting. Let’s rock!
1. General Troubleshooting Before Resetting Winsock
In general, you should always make sure that your hardware is working properly and you don’t have any corrupt/damage files on your drive. Plus it’s a good habit to update your drivers frequently.
- clean your PC of viruses, trojans
- run a chkdsk /f /r to make sure you don’t have any disk erros
- run sfc.exe /scannow to validate your system files
- install latest network drivers
2. Reset/Renew TCP/IP connection:
The first commands you should try when you encounter network connectivity issues are:
ipconfig /release
ipconfig /renew
/release will terminate all of your TCP/IP connections
/renew will establish a new TCP/IP connection
/renew will establish a new TCP/IP connection
Sidenote: Both commands only work if your network adapter is configured for DHCP. DHCP will auto-assign you an IP-address.
Finally, if that doesn’t work you could try to reset your winsock catalog.
3. Repair & Reset Winsock Catalog in Windows 7
I wasn’t even able to remove my NVIDIA network controller. My theory was that my winsock entries were somehow damaged.
Winsock entries tells Windows 7 how to access your network services. Additionally, your TCP/IP protocol can be corrupted. The TCP/IP protocol is a stack of 4 layers that includes several transport layers, but when this stack is corrupt you will constantly have connectivity issues.
netsh winsock reset catalog (reset winsock entries)Winsock Registry Keys
netsh int ip reset reset.log hit (reset TCP/IP stack)
Advanced users will find the winsock registry keys at:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2]
======================
Often connection problems are caused by malformed winsock entries and invalid LSPs (Layered Service Providers). LSP entries are responsible for managing your inbound and outbound internet traffic.
WinsockFix – Repair/Reset Winsock and TCP/IP on Windows XP
WinsockFix is a great utility to reset and repair Winsock. It’s probably the best and quickest fix for all connection problems, but I wouldn’t use it on Windows 7. How could I trust an applicaton that is not able to detect my system and says I’m running a 32-bit Windows? WinsockFix was written for Windows 95, ME, XP, 2000, so I wouldn’t use it on Vista on Windows 7, but if you are still on Windows XP, I would recommend the tool.
----------------------------------
http://windowsxp.mvps.org/winsock.htm
posible razón:
http://geekotic.com/2009/07/23/grave-agujero-de-seguridad-en-dd-wrt-permite-control-total/
LibreOffice
Firefox
No comments:
Post a Comment