TP-Link TL-WN620G

http://www.tp-link.com/en/support/download/
elegir
end of life products
http://www.tp-link.com/en/support/download/?model=TL-WN620G

Driver
TL-WN620G_071103	Published Date 11/3/2007 Language English File Size 12.146 MB Operating System Win9x/Me/2000/XP/Vista Notes for TL-WN620G

Document
Category	Language	Download	Size
User Guide	English	TL-WN620G User Guide	8.087 MB

Some official firmware of TP-LINK products can be replaced by the third party firmware such as DD-WRT. TP-LINK does not provide technical support and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Please according to the hardware version of your device to find the suitable firmware version, wrong version firmware may damage your device and void the warranty.
For example, Version 4 firmware is only for Version 4 hardware, it is NOT the upgraded version for Version 1\2\3.

Do NOT turn off the power during upgrading

Do NOT upgrade the firmware through wireless connection

Use decompression software such as WinZIP or WinRAR to extract the file you download before upgrading.

Please according to the hardware version of your device to find the suitable firmware version, wrong version firmware may damage your device and void the warranty.
For example, Version 4 firmware is only for Version 4 hardware, it is NOT the upgraded version for Version 1\2\3.

Do NOT turn off the power during upgrading

Do NOT upgrade the firmware through wireless connection

Use decompression software such as WinZIP or WinRAR to extract the file you download before upgrading.

http://www.sevenforums.com/network-sharing/19808-losing-internet-resume-sleep.html
have a look at your network properties and, if you already haven't done so, try unticking the box marked below.

hope this helps!

Attached Thumbnails

http://www.sevenforums.com/network-sharing/19808-losing-internet-resume-sleep.html
Hast du diesen Vorschlag ausprobiert? Bzw. den kannst du dann unter Win7 64bit testen.
http://www.tp-link.com/en/support/faq/?pcid=201&problem=13&m=TL-WN620G&keywords=driver&faqid=

http://www.techsupportforum.com/forums/f19/tl-wn620g-driver-problem-368672.html

---

http://www.tp-link.com/support/download.asp

Hi, I have a tl-wn620G wireless adapter and a tl-wr641G router which I used to use with my old XP Pro computer which worked fine and then I got a vista home basic for christmas and have tried to use the adapter with the new computer but when the adapter is connected to the computer and linked with the router and I start surfing the web I then get the blue screen. I have installed the latest drivers for the adapter and even tried to download a different driver for it but with the file extensions that they had I couldnt install them. From the solutions windows that appears when the error report is sent to microsoft after the computer restarts, it says that its the driver thats causing the blue screen. I am currently using the new computer with the adapter wirelessly connected to the router now after a little experiment that I tried, setting the mode on the router from 108Mbps (Dynamic) to 108Mbps (static) which when it was set to Static, the adapter didnt detect it which it did on the old comp and so I set it to Dynamic and it did detect it but after browsing witht hat the blue screen came up, so I tried changing from 108 down to 54Mbps which dont use the super G feature and it works with no blue screen so im thinking that its something to do with the super g compatibility and the motherboard of the new comp. The system is a Ei System Ei402, mainboard Foxconn 45gm/45cm chipset Intel 945x (lakeport) info from SiSoftware Sandra, if you need more info I can copy and past everything it says about the motherboard. Any help with this so that I can use the 108 mode with my vista comp without the blue screen will be appreciated, Thanks.

you should be able to find what you need there
added info this is the driver for the wireless card
http://www.tp-link.com/support/downl...=1&m=TL-WN620G the user guide is also there also wr614g is listed as a switch not a router i would check that again

hi this is a link to tplink who are the mfr of your kit http://www.tp-link.com/support/download.asp you should be able to find what you need there
added info this is the driver for the wireless card
http://www.tp-link.com/support/downl...=1&m=TL-WN620G the user guide is also there also wr614g is listed as a switch not a router i would check that again

This is supposed to be the driver for the card http://www.tp-link.com/support/downl...=1&m=TL-WN620G which tplink the manufacturer is posting
As a switch not a router

Wireless adapter:
http://www.tp-link.com/support/downl...=1&m=TL-WN620G

Router Firmware update:
http://www.tp-link.com/support/downl...=1&m=TL-WR641G
(need to know the version number here, v1,v2,v3)?

Note:
1. Disable antivirus and antispyware protection
2. Install driver for the wireless adapter
3. plug it into pc when the installation asks you to
4. reboot pc after installation completes
5. After rebooting pc, go into the wireless adapters properties and set it up
6. After setting up the wireless adapter
7. Configure the router, by opening IE and typing in the web browser 192.168.1.1
(admin is the default password, make a new password for the router using letters,numbers and symbols atleast 8 digits long).
8. Save settings after configuring router.
9. reboot pc

Note: you dont have to be connected to the internet to access your router.
also not necessary to use the cd that came with the router either.

http://www.sevenforums.com/network-i...ume-sleep.html
AW: Treiberproblem mit Tp Link W-Lan Stick (TP-Link TL-WN821N) unter Wi 7 64Bit

Habe ein ähnliches Problem auch mit Windows 7 64bit und dem wlan-stick 620g von TP-Link.
Im Gerätemanager ist alles OK, aber sobald ich ins Internet connecte bekomme ich einen Bluescreen als Dank...